Réparez vos affaires Communauté Boutique

Motorola Moto G7 Play Motherboard Replacement

Introduction

This motherboard replacement guide should be attempted if other parts of the device were replaced, but the problem persisted. The steps should be followed for the Motorola G7 Play, models XT1952-3 and XT1952-2. The motherboard powers the whole device and makes it function, so it’s a very important part that should be replaced if it is damaged.

Before you begin, download the Rescue and Smart Assistant app to backup your device and diagnose whether your problem is software or hardware related.

Ce dont vous avez besoin

  1. Motorola Moto G7 Play Motherboard Replacement, Back Cover: étape 1, image 1 de 2 Motorola Moto G7 Play Motherboard Replacement, Back Cover: étape 1, image 2 de 2

    • Turn off your device before you begin.

    • Use the iFixit pick to break the adhesive around the back case.

    • Use a heat gun, hairdryer, or iOpener to weaken the adhesive around the back case. If you're using the iOpener, please review the instructions for proper use.

    Modifier

  2. Motorola Moto G7 Play Motherboard Replacement: étape 2, image 1 de 1

    • Detach the back case from the phone.

    • Make sure the back is opened right to left so the cable of the fingerprint scanner does not get damaged.

    Modifier

  3. Motorola Moto G7 Play Motherboard Replacement: étape 3, image 1 de 2 Motorola Moto G7 Play Motherboard Replacement: étape 3, image 2 de 2

    • Use the iFixit pick and the iFixit opening tool to pull the fingerprint scanner off of the back case.

    Modifier

  5. Motorola Moto G7 Play Motherboard Replacement, Motherboard: étape 4, image 1 de 1

    • Remove the nine 3.2mm screws from the motherboard cover with a Phillips #00 screwdriver.

    Modifier

  6. Motorola Moto G7 Play Motherboard Replacement: étape 5, image 1 de 1

    • Lift motherboard cover off by the bottom.

    • Use reverse tweezers or a similar tool if needed.

    Modifier

  7. Motorola Moto G7 Play Motherboard Replacement: étape 6, image 1 de 2 Motorola Moto G7 Play Motherboard Replacement: étape 6, image 2 de 2

    • Once the motherboard cover is removed, disconnect the four ribbon cables and the two wires attached to the motherboard.

    Modifier

  8. Motorola Moto G7 Play Motherboard Replacement: étape 7, image 1 de 2 Motorola Moto G7 Play Motherboard Replacement: étape 7, image 2 de 2

    • Using the Phillips #00 screwdriver, remove the single 0.4 mm black screw in the center of the motherboard.

    • Remove the motherboard from the device.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Auteur

avec 5 autres contributeurs

Monserath Casillas

Membre depuis le 02/10/20

1 146 Réputation

5 tutoriels rédigés

Badges: 11

+ 8 badges supplémentaires

Équipe

Cal Poly, Team S7-G4, Regan Winter 2020 Membre de l'équipe Cal Poly, Team S7-G4, Regan Winter 2020

CPSU-REGAN-W20S7G4

5 membres

12 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 4

30 derniers jours : 22

Total : 2,166