Introduction
The radio button contacts are responsible for transmitting the radio user's touch to the circuit board. Malfunctioning button contacts can make the radio unresponsive when a button is pressed. Follow the steps below to properly clean the button contacts to restore button function.
Ce dont vous avez besoin
-
-
Remove the back battery cover by pressing the tab to the left, and lifting.
-
-
-
-
Remove the four 3 millimeter T6 Torx screws from the front of the radio.
-
-
-
The button contacts can be seen in the red box of the picture.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.