Un câble XLR a pour rôle de transporter un signal audio. Il se connecte en bas du microphone au connecteur XLR.

  1. Assurez vous d'avoir un câble XLR avec trois broches.
    • Assurez vous d'avoir un câble XLR avec trois broches.

    • Prenez l'embout femelle du câble XLR (embout avec trois trous).

    Ajouter un commentaire

  2. Alignez les broches du bout du microphone (le connecteur du microphone) avec les trous du câble XLR.
    • Alignez les broches du bout du microphone (le connecteur du microphone) avec les trous du câble XLR.

    Ajouter un commentaire

    • Une fois que les broches sont alignées, poussez le câble dans le microphone. Vous devriez entendre un clic.

    Ajouter un commentaire


Pour débrancher le câble du micro, suivez les instructions dans l'ordre inverse.

12 autre(s) ont terminé cette réparation.

Merci à ces traducteurs :


Ces traducteurs nous aident réparer le monde ! Vous voulez contribuer ?
Commencez à traduire ›

nat coll

Membre depuis le 27/09/2012

372 Réputation

14 tutoriels rédigés


Cal Poly, Team 7-53, Forte Fall 2012 Membre de l'équipe Cal Poly, Team 7-53, Forte Fall 2012


5 membres

18 tutoriels rédigés

20 commentaires

When disconnecting the cable - press the little latch (pointing towards you in the last picture) to release and then pull the cable out.

harrywwc - Réponse

Is this April's fool? XD

s6963172 - Réponse

how i repair the PG48 the XLR conector moves in and out when the cable ar plugged. The conector male in the microphone have an screw but that one not works...

What am i do?

If you have an idea to the answer or any tip to resolve this trouble feel fre to tweet me.

@ Theradioholic



Santiago Morales - Réponse

I know a few people who would see this and still screw it up.

jimboc - Réponse

do it in reverse? you have to press the button though on the male end...

Michael Fox - Réponse

Will this work with an Audio-Technica ATM-410, or just the Shure?

cbrislain - Réponse

Just Shure. On Audio-Technica you have to rotate the plug six times clockwise and whisper a few nice words into it before plugging it in. I've always found that lullabies work quite well.

staale -

I have a 1/4 adapter on my Shure, is that process different? I can't seem to make the male 1/4" connect to the female XLR


Push harder.

staale -

Some of us are musicians , so we appreciate the help

tomandlindafirme - Réponse

When do you hear the sound from it?

Charlie Green - Réponse

Bloomin' eck.... & I've been using cellotape, Blu Tak and super glue. No wonder I had to revert to the megaphone all the time

george sandoz - Réponse

I don't know about you lando77 but I always blow on the female end (the cable end with the holes) to blow dry any moisture out. What good does it do to blow on the male pins?

darryltrimm - Réponse

Do these instructions work for the ElectroVoice EV 635A as well?

carterjim - Réponse

This is useless. Why didn't you post a video that shows the process.

mperloe - Réponse

Wow!!! Thank you so much! This is really great information. Now I won't have to hire people to come do this for me anymore. Can you post a video of how to put the microphone on a stand?

dhoffman98 - Réponse

Thanks for posting this, I recently ran out of toilet tissue and have been using my Shure SM58 Owner's Manual. You're a lifesaver!

hemightbefluffy - Réponse

He's holding the plug with his right hand. But what if I'm left handed. Do I need to rotate it? Or should I switch what side I'm standing on?

Bob DeMaa - Réponse

Managed it on 5th attempt , now what the heck do I do with the other end of the cable ???

gary blair - Réponse

are these instructions specifically for drummers or can anybody use them?

Cedric the Dead - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 5

7 derniers jours : 18

30 derniers jours : 59

Total : 58,896