Introduction

The Pyle Astro’s screen is comprised of three layers, the external touch panel, the capacitive touch screen overlay, and the tablet’s LCD. Use this guide to replace your tablet’s LCD.

Using the plastic opening tool, work your way along the edge of the tablet.
  • Using the plastic opening tool, work your way along the edge of the tablet.

  • The display is held in place by plastic tabs which slide into recesses in the rear plastic panel.

  • Once all clips are released, gently open and separate the front display assembly and the rear plastic panel.

  • Place the front display assembly facing front side down to expose the inside.

Ajouter un commentaire

Remove the three 4 mm JIS #0 screws to release the PCB board.
  • Remove the three 4 mm JIS #0 screws to release the PCB board.

Ajouter un commentaire

  • The display is held in place by plastic tabs which slide over the outer edges of the backside of the display.

  • Gently work your way around the display while pulling the plastic tabs back to release the LCD display from the front panel.

Ajouter un commentaire

  • Once all clips are released gently open and separate the front plastic display from the LCD and place the LCD face down.

  • The front plastic display contains the external touch panel, and the capacitive touch screen overlay.

Ajouter un commentaire

  • Using both hands, gently release the ribbon cable to the capacitive touch screen overlay from the PCB board by pushing both gray tabs outwards.

Ajouter un commentaire

Ajouter un commentaire

  • Using a plastic card gently remove the adhesive that holds the battery in place and separate the battery from the LCD panel.

  • Exercise extreme caution and be sure to not rupture the battery casing.

Ajouter un commentaire

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Andrew Redifer

Membre depuis le 27/03/2018

265 Réputation

2 tutoriels rédigés

Équipe

IUPUI, Team S3-G6, Harley Spring 2018 Membre de l'équipe IUPUI, Team S3-G6, Harley Spring 2018

IUPUI-HARLEY-S18S3G6

3 membres

2 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 6

Total : 66