Introduction
The replacement of the wheels is necessary if no profile is available, or they dissolve into their individual parts, which unfortunately occurs more often in the standard tires. The above-linked spare parts are the original wheels, which I would advise against because of the lower quality. It should fit all current 1:10 wheels.
Ce dont vous avez besoin
-
-
Put the 7mm nut ready (spanner or combination wrench may turn out to be unsuitable)
-
Put the car upright
-
-
Presque terminé !
reverse the steps to reassemble your device.
Conclusion
reverse the steps to reassemble your device.
Merci à ces traducteurs :
de en
100%
irlanda nous aide à réparer le monde ! Vous voulez contribuer ?
Commencez à traduire ›
