Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Start by using the PH00 Phillips Screwdriver to take out the 6 1 mm screw's on the bottom of the device.
-
Pry open the aluminum plate using the Plastic Opening Tool(s).
-
Remove the 2 1. mm screws using the PH00 Phillips Screwdriver.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Pry open the back case as shown using the Plastic Opening Tool.
-
Disconnect the battery from motherboard by carefully pulling up on the connector.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Unscrew the 9 1 mm screwdrivers using a PH00 Phillips Screwdriver.
-
Carefully detach the motherboard, from the housing unit using your hands.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Using the Plating Tool Opener, arefully disconnect the ribbon cable that attaches the camera to the housing.
-
Replace camera, and follow the steps in reverse order to reassemble
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Unscrew the two 1 mm screws using the PH00 Philips Screwdriver.
-
Detach the black and red wire connected to the motherboard, using the tweezers, to remove the camera.
-
Annulation : je n'ai pas terminé ce tutoriel.
3 autres ont terminé cette réparation.
8 commentaires
What camera should I use to replace a malfunctioning camera in the ring video doorbell? And where do I buy it?
Bump. What camera should I use to replace? (Scratched Lens.) Is the lens you can touch, a lens, or is it just a cover? Mine fell at there is chip right in the center that make the image unusable.
I have a scratch dead center of mine too. Have no clue how it got there as I’m super careful when I take it off to charge. Ugh. did you find out where to buy a replacement?
What camera should I use to replace? (Scratched Lens.) I have the right 1st generation with a 740p camera
Has anyone found a replacement camera online?