Il est possible que cette traduction ne reflète pas les dernières mises à jour du tutoriel source. Aidez à mettre à jour la traduction ou bien consultez le tutoriel source.
Introduction
Pré-requis uniquement.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a plastic opening tool to pry the front-facing camera connector from its socket on the motherboard.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Disconnect the digitizer cable by gently prying its connector up from its socket on the motherboard.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Disconnect the display data cable from the motherboard.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Pry the Wi-Fi antenna cable connector up from its socket on the motherboard.
-
Gently move the cable out of the way of the motherboard.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the single 3.0 mm Phillips screw securing the motherboard to the front panel assembly.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Carefully lift the bottom of the motherboard assembly away from the front panel assembly.
-
Remove the motherboard assembly from the front panel assembly, minding any cables that may snag on it.
-
Pour remonter votre appareil, suivez les instructions dans l'ordre inverse.
Pour remonter votre appareil, suivez les instructions dans l'ordre inverse.
Merci à ces traducteurs :
40%
Ces traducteurs nous aident réparer le monde ! Vous voulez contribuer ?
Commencez à traduire ›