Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Introduction
Utilisez ce tutoriel pour remplacer la caméra arrière.
Ce dont vous avez besoin
-
-
Insérez un outil d'ouverture en plastique ou un ongle dans l'encoche de l'écart entre le boîtier arrière et le reste du téléphone, situé sur le dessus de l'appareil.
-
Tordez doucement l'outil d'ouverture pour déconnecter les clips qui fixent le haut du boîtier arrière.
-
-
-
Coincer un outil d'ouverture en plastique dans la petite encoche au-dessus de la batterie.
-
Retirez la batterie de son logement.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Using your fingernail, push the SIM card slightly deeper into its slot, until you hear a click.
-
After the click, release the card and it will pop out of its slot.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use your thumb to slide enough of the SIM card out of its slot to grab ahold of it.
-
Grasp and remove the SIM card away from the phone.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Using your fingernail, push the microSD card slightly deeper into its slot, until you hear a click.
-
After the click, release the card and it will pop out of its slot.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use your thumb to slide the microSD card out of the slot.
-
Remove the microSD card from the phone.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the ten 4.0 mm Phillips screws securing the midframe to the front panel assembly.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Grasp the left side of the plastic midframe with your thumb and forefinger and lift it away from the phone.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a plastic opening tool to pry the front-facing camera connector from its socket on the motherboard.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Disconnect the digitizer cable by gently prying its connector up from its socket on the motherboard.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Disconnect the display data cable from the motherboard.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Pry the Wi-Fi antenna cable connector up from its socket on the motherboard.
-
Gently move the cable out of the way of the motherboard.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the single 3.0 mm Phillips screw securing the motherboard to the front panel assembly.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Carefully lift the bottom of the motherboard assembly away from the front panel assembly.
-
Remove the motherboard assembly from the front panel assembly, minding any cables that may snag on it.
-
-
-
Utilisez un outil d'ouverture en plastique pour extraire de sa prise le connecteur de la caméra arrière.
-
Pour réassembler votre appareil, suivez ces instructions dans l'ordre inverse.
Pour réassembler votre appareil, suivez ces instructions dans l'ordre inverse.
Annulation : je n'ai pas terminé ce tutoriel.
32 autres ont terminé cette réparation.
Merci à ces traducteurs :
100%
Ces traducteurs nous aident réparer le monde ! Vous voulez contribuer ?
Commencez à traduire ›
3 commentaires
Hola es muy bueno el tutoril pero yo tengo un problema y es que la camera de mi samsung galaxy s3 no funciona cuando quiero hacer selfie se bloquea me toca ir a aplicaciones borrar todo sus ajustes para poder usar la de nuevo he probado también con app de otros pero a la hora de hacer selfie se bloquea y toca borrar sus ajustes,por lo demás funciona bien
Is it possible to extend the camera strip for the rear facing camera so it could be taken out of the case and make it forward mounted (as an example)? How would you go about this I have an old s3 and want to adapt it into a hidden spy camera for when I am away to watch the house
I simply followed these instructions and the repair worked perfectly. Many thanks indeed for your help.