Samsung Galaxy S10e Midframe Replacement - Tutoriel de réparation iFixit

Introduction

Prerequisite-only guide to remove the midframe in a Samsung Galaxy S10e. The wireless charging coil and NFC coil are both included in the midframe.

Ce dont vous avez besoin

Étape 1 Remove the midframe

Samsung Galaxy S10e Midframe Replacement, Remove the midframe: étape 1, image 1 de 1

Remove the eight 3.9 mm Phillips screws securing the upper midframe to the phone.

Étape 2

Samsung Galaxy S10e Midframe Replacement: étape 2, image 1 de 2

Samsung Galaxy S10e Midframe Replacement: étape 2, image 2 de 2

Slide an opening pick under the bottom right corner of the upper midframe to separate the adhesive holding it to the lower midframe.

Étape 3

Samsung Galaxy S10e Midframe Replacement: étape 3, image 1 de 2

Samsung Galaxy S10e Midframe Replacement: étape 3, image 2 de 2

Insert the point of a spudger in the small cutout on the right edge of the plastic part of the upper midframe, near the Bixby button.
Use the point of the spudger to pry the midframe up from the phone chassis.

Étape 4

Samsung Galaxy S10e Midframe Replacement: étape 4, image 1 de 1

Lift the midframe by the plastic section and remove it from the phone.
To reinstall, first insert the top edge of the assembly into the phone's frame, and then gently press down on the rest of the assembly to snap it into place.

Conclusion

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

2 autres ont terminé cette réparation.

Auteur

avec 1 autre contributeur

Adam O'Camb

Membre depuis le 04/11/15

196 299 Réputation

416 tutoriels rédigés

+ 36 badges supplémentaires

0 commentaires

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 137