Aller au contenu principal
  1. Make sure the camera is powered off by pressing and holding the small, square button embedded in the top rim of the camera.
    • Make sure the camera is powered off by pressing and holding the small, square button embedded in the top rim of the camera.

  2. Locate the hatch found on the bottom of the camera.
    • Locate the hatch found on the bottom of the camera.

    • Open the hatch by gripping the small notch and sliding it outwards.

  3. Ignorez les nouveaux gadgets.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now

    Ignorez les nouveaux gadgets.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now
  4. Push the small, plastic arm out of the way to free the battery.
    • Push the small, plastic arm out of the way to free the battery.

    • The battery is spring loaded and will pop out slightly when the arm is moved.

  5. Pull the battery out of the camera and close the hatch.
    • Pull the battery out of the camera and close the hatch.

    • To reinsert, there is a triangle on the battery indicating which direction to slide it in.

Conclusion

To reassemble your device, follow these instructions in reverse order.

James Robinson

Membre depuis le 27/10/2015

432 Réputation

4 tutoriels rédigés

Équipe

UMass Dartmouth, Team 5-5, Gulbrandsen Fall 2015 Membre de l'équipe UMass Dartmouth, Team 5-5, Gulbrandsen Fall 2015

UMASSD-GULBRANDSEN-F15S5G5

3 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 3

Total : 187