Introduction

If you need to replace or re-install the accessory hose attachment for your Steam Pocket Mop, this guide will walk you through the process. There are no tools needed to complete this replacement.

  1. Turn off the Steam Pocket Mop and unplug it from the wall. Be sure that any water in the water tank cools before proceeding.
    • Turn off the Steam Pocket Mop and unplug it from the wall.

    • Be sure that any water in the water tank cools before proceeding.

  2. %Livraison gratuite pour toute commande supérieure à 100 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique
  3. Disconnect the hand-held steamer unit from the main unit. Grip the hand-held steamer and push down on the two release buttons.
    • Disconnect the hand-held steamer unit from the main unit.

    • Grip the hand-held steamer and push down on the two release buttons.

    • Gently pull the unit out in a horizontal motion until it disconnects.

    • When reassembling, be sure to insert the base of the hand-held unit first.

    • If you have any problems with the hand-held steamer locking into place, please consult our Troubleshooting Page.

    • We did not have the accessory hose, which is why it is not pictured.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Rachel Howe

Membre depuis le 17/10/2018

219 Réputation

2 tutoriels rédigés

Équipe

UW Tacoma, Team S1-G3, Rose Fall 2018 Membre de l'équipe UW Tacoma, Team S1-G3, Rose Fall 2018

UWT-ROSE-F18S1G3

4 membres

5 tutoriels rédigés

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 9

Total : 102