Tablet Chuwe 10.1 Touch Screen Replacement

Fran Ruiz et 2 autres contributeurs

Dernière mise à jour le October 1, 2018

1 - 4 minutes

Modérée

Tutoriel réalisé par la communauté

Introduction

Passez à l'étape 1

It's common to break the touch screen of your device, we are going to learn to dismount and get to the Flex cable to find out the reference number so we can order a new touch screen to substitute the broken one

Ce dont vous avez besoin

Outils

Afficher plus…

Étape 1 Touch Screen

Tablet Chuwe 10.1 Touch Screen Replacement, Touch Screen: étape 1, image 1 de 2

Tablet Chuwe 10.1 Touch Screen Replacement, Touch Screen: étape 1, image 2 de 2

We must use a plastic guitar pick or in the case that you do not have one, a plastic card can do us helpful (credit card)

Traduire

Étape 2

Tablet Chuwe 10.1 Touch Screen Replacement: étape 2, image 3 de 3

Slowly, insert the pick pressing it and swinging it along the perimeter of the tablet's body

Traduire

Étape 3

Carefully loosen with your fingers the back and place the tablet face down on a flat and clean surface tablet

Traduire

Étape 4

the speaker is screwed next to the touch chassis, we must release the screw and place it in a visible place, the speaker will remain with adhesive tape next to the battery

Traduire

Étape 5

With the help of the pua or the fingers, we must release the data FLEX from the connection, making a small upward pressure

Traduire

Étape 6

Careful! The FLEX cable that joins the front and rear camera, will be completely loose, we must place it in a clean place for later assembly.

Traduire

Étape 7

we will have a third FLEX on the motherboard, we must do the same method to press up on the connector until it is released, carefully these FLEX are easy to break.

Traduire

Étape 8

now with the help of a Phillips screwdriver, we must release the three screws that hold the base plate of the touch screen chassis, and the sensor with positive and negative cables, we can help with the fingers in a smooth way.

Traduire

Étape 9

carefully, we already have the loose base plate of the touch chassis, we look at the various grips that connect the touch screen with the LCD and with the tine and small balancing we are doing pressure to separate touch and LCD screen.

Traduire

Étape 10

Tablet Chuwe 10.1 Touch Screen Replacement: étape 10, image 3 de 3

Following these steps we have loosen our LCD screen and the carcass of the touch screen, now we must look for the reference number that appears on the FLEX cable of the touch screen so we can order a new one

Traduire