Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a T-9 Torx screwdriver to unscrew the four screws on the back cover.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Using the spudger, gently pry apart the back case from the front case. It is easier to start on a side and work your way around the device.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Once the two covers are separated, use tweezers, or even your fingers, to gently disconnect the two sets of wires that are connected to the motherboard from the back cover.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Next, you must remove the motherboard from the front screen.
-
Use a Torx T-7 screwdriver to unscrew the two screws.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Before you can seperate the motherboard from the front cover, you must disconnect the wire connecting the two.
-
To do so, you must use the back end of the spudger to push out the two white tabs connected to the wire, that holds the motherboard and front cover together.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
The motherboard is now disconnected from the front assembly
-
Annulation : je n'ai pas terminé ce tutoriel.
4 autres ont terminé cette réparation.