Réparez vos affaires Communauté Boutique

Toro Cement Mixer 68009HD 2018 Tub Replacement

Introduction

This guide shows how to remove and replace the tub for the Toro Cement Mixer 68009HD.

Warning: The tub is extremely heavy and requires at least two people to lift it. Be sure to practice safe lifting techniques.

Ce dont vous avez besoin

  1. Toro Cement Mixer 68009HD 2018 Tub Replacement, Safety precautions: étape 1, image 1 de 2 Toro Cement Mixer 68009HD 2018 Tub Replacement, Safety precautions: étape 1, image 2 de 2

    • Before you begin, press the engine-stop switch to turn off the engine.

    Modifier

  2. Toro Cement Mixer 68009HD 2018 Tub Replacement: étape 2, image 1 de 3 Toro Cement Mixer 68009HD 2018 Tub Replacement: étape 2, image 2 de 3 Toro Cement Mixer 68009HD 2018 Tub Replacement: étape 2, image 3 de 3

    • Unlatch the three rubber straps securing the cowl.

    Modifier

  3. Toro Cement Mixer 68009HD 2018 Tub Replacement: étape 3, image 1 de 3 Toro Cement Mixer 68009HD 2018 Tub Replacement: étape 3, image 2 de 3 Toro Cement Mixer 68009HD 2018 Tub Replacement: étape 3, image 3 de 3

    • Swing the cowl up until it rests securely on the frame.

    Modifier

  4. Toro Cement Mixer 68009HD 2018 Tub Replacement: étape 4, image 1 de 2 Toro Cement Mixer 68009HD 2018 Tub Replacement: étape 4, image 2 de 2

    • Slide the fuel cutoff lever to the left to cut the fuel supply to the engine.

    Modifier

  6. Toro Cement Mixer 68009HD 2018 Tub Replacement: étape 5, image 1 de 2 Toro Cement Mixer 68009HD 2018 Tub Replacement: étape 5, image 2 de 2

    • Grab the plastic housing at the end of the spark plug wire.

    • Pull firmly to disconnect the wire from the spark plug.

    Modifier

  7. Toro Cement Mixer 68009HD 2018 Tub Replacement, Remove the tub: étape 6, image 1 de 2 Toro Cement Mixer 68009HD 2018 Tub Replacement, Remove the tub: étape 6, image 2 de 2

    • Pull up on the brake lever to disengage the brake.

    Modifier

  8. Toro Cement Mixer 68009HD 2018 Tub Replacement: étape 7, image 1 de 3 Toro Cement Mixer 68009HD 2018 Tub Replacement: étape 7, image 2 de 3 Toro Cement Mixer 68009HD 2018 Tub Replacement: étape 7, image 3 de 3

    • Rotate the tub until the yoke and dish assembly sit directly below the tub.

    Modifier

  9. Toro Cement Mixer 68009HD 2018 Tub Replacement: étape 8, image 1 de 2 Toro Cement Mixer 68009HD 2018 Tub Replacement: étape 8, image 2 de 2

    • Push down on the brake lever to re-engage the brake.

    • Make sure that the brake is fully engaged.

    Modifier

  10. Toro Cement Mixer 68009HD 2018 Tub Replacement: étape 9, image 1 de 3 Toro Cement Mixer 68009HD 2018 Tub Replacement: étape 9, image 2 de 3 Toro Cement Mixer 68009HD 2018 Tub Replacement: étape 9, image 3 de 3

    • Use a 3/4 inch socket to remove the six nuts securing the tub to the dish.

    Modifier

  11. Toro Cement Mixer 68009HD 2018 Tub Replacement: étape 10, image 1 de 1

    • Remove the six drum clamp plates from the tub mounting points.

    Modifier

  12. Toro Cement Mixer 68009HD 2018 Tub Replacement: étape 11, image 1 de 1

    • Lift the tub up slightly by the gear ring to loosen the tub from the dish.

    Modifier

  13. Toro Cement Mixer 68009HD 2018 Tub Replacement: étape 12, image 1 de 3 Toro Cement Mixer 68009HD 2018 Tub Replacement: étape 12, image 2 de 3 Toro Cement Mixer 68009HD 2018 Tub Replacement: étape 12, image 3 de 3

    • The tub is extremely heavy and requires at least two people to lift it. Be sure to practice safe lifting techniques.

    • Lift the tub straight up from the dish and remove it from the device.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

Arthur Shi

Membre depuis le 01/03/18

253 346 Réputation

526 tutoriels rédigés

Badges: 47

+ 44 badges supplémentaires

Équipe

iFixit Membre de l'équipe iFixit

Staff

135 membres

17 182 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 6

Total : 236