1. Push the left tab with your left hand.
    • Push the left tab with your left hand.

    • Then push the right tab with your right hand.

    • While your right hand is still pushing, remove the battery with your left hand.

  2. Remove one JIS #000 screw.
    • Remove one JIS #000 screw.

    • This screw does not come out all the way, but you will still be able to open the back panel.

    • Use the plastic opening tool to pry the panel open. Be sure to do this on all four sides. Then the panel will lift off.

    • Take the nylon spudger, and push the prongs so that it releases the RAM.

    • Once the RAM has lifted, use tweezers or fingers to pull it out.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Kari Rodgers

Membre depuis le 08/02/2018

410 Réputation

4 tutoriels rédigés

Équipe

Sam Houston State, Team S16-G1, Nardone Spring 2018 Membre de l'équipe Sam Houston State, Team S16-G1, Nardone Spring 2018

SHSU-NARDONE-S18S16G1

5 membres

5 tutoriels rédigés

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 8

Total : 71