Réparez vos affaires Communauté Boutique

Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement

Introduction

Follow this guide to remove the drive belt for the Wacker Compactor Plate VP1550AW 2014.

Ce dont vous avez besoin

  1. Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Safety precautions: étape 1, image 1 de 2 Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Safety precautions: étape 1, image 2 de 2

    • Before you begin, be sure that the engine is powered off and is cool to the touch.

    • Grab the plastic housing at the end of the spark plug wire.

    • Pull firmly to disconnect the wire from the spark plug.

    Modifier

  2. Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Loosen the belt guard: étape 2, image 1 de 1

    • Use a 1/2" socket and wrench to loosen the two bolts securing the belt guard.

    • The bolts are captive and should not be removed.

    Modifier

  4. Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Remove the belt guard: étape 3, image 1 de 2 Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Remove the belt guard: étape 3, image 2 de 2

    • Remove the belt guard.

    Modifier

  5. Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Remove the drive belt: étape 4, image 1 de 3 Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Remove the drive belt: étape 4, image 2 de 3 Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Remove the drive belt: étape 4, image 3 de 3

    • Use scissors or a blade to cut the drive belt.

    • Remove the drive belt.

    Modifier

  6. Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Install a replacement belt: étape 5, image 1 de 1

    • Loop the replacement belt onto the small pulley.

    Modifier

  7. Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement: étape 6, image 1 de 3 Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement: étape 6, image 2 de 3 Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement: étape 6, image 3 de 3

    • Replacing the belt poses a substantial pinching hazard. Wear safety gloves and be mindful where you position your fingers.

    • Guide the belt over the top of the clutch pulley.

    • Loop the belt underneath the pulley axle.

    • Rotate the pulley slowly and guide the built into the groove.

    • Getting the replacement belt back onto the drive pulley requires considerable strength.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 1 autre contributeur

Arthur Shi

Membre depuis le 01/03/18

253 172 Réputation

526 tutoriels rédigés

Badges: 47

+ 44 badges supplémentaires

Équipe

iFixit Membre de l'équipe iFixit

Staff

135 membres

17 125 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 7

30 derniers jours : 34

Total : 3,005