Introduction
In this simple and straightforward guide we will show you how to disassemble and replace the joystick and buttons of a Wii Nunchuk controller. You may need to replace the buttons and joystick if they stop working or you may just want to give the area a good careful clean with isopropyl alcohol.
Ce dont vous avez besoin
-
-
Use a Tri-point Y0 screwdriver to remove the two 9.2 mm screws from the back of the controller.
-
-
Presque terminé !
Take your e-waste to an R2 or e-Stewards certified recycler.
Conclusion
Take your e-waste to an R2 or e-Stewards certified recycler.