Réparez vos affaires Communauté Boutique

Xbox Intec 7.2" Color Game Screen Disassembly

Introduction

This guide will assist you disassemble your Intec 7.2" Color Game Screen attachment. Instructions may be similar to the Intec 5.4" Color Game Screen attachment although this is currently unknown.

Ce dont vous avez besoin

  1. Xbox Intec 7.2" Color Game Screen Disassembly, Intec 7.2" Color Game Screen: étape 1, image 1 de 2 Xbox Intec 7.2" Color Game Screen Disassembly, Intec 7.2" Color Game Screen: étape 1, image 2 de 2

    • Top shell is held in place with 4 screws and 6 retaining tabs

    • Remove 2 rubber pads to uncover 2 hidden screws

    • Remove 4 #1 screws

    Modifier

  2. Xbox Intec 7.2" Color Game Screen Disassembly: étape 2, image 1 de 2 Xbox Intec 7.2" Color Game Screen Disassembly: étape 2, image 2 de 2

    • Take a spudger and disengage the 6 retaining tabs

    • This will be the most time-consuming step. Be patient and take your time.

    • You will hear an audible pop when disengaging the tabs.

    • Remove top housing

    Modifier

  3. Xbox Intec 7.2" Color Game Screen Disassembly: étape 3, image 1 de 2 Xbox Intec 7.2" Color Game Screen Disassembly: étape 3, image 2 de 2

    • Remove 2 #1 screws

    • Disconnect 4 wire harnesses

    Modifier

  5. Xbox Intec 7.2" Color Game Screen Disassembly: étape 4, image 1 de 3 Xbox Intec 7.2" Color Game Screen Disassembly: étape 4, image 2 de 3 Xbox Intec 7.2" Color Game Screen Disassembly: étape 4, image 3 de 3

    • Disconnect speaker header

    • It's not necessary to remove the speakers from the housing unless you need to.

    • Disconnect header if speakers need to be removed. Otherwise, this will be done in the next step.

    • Remove 8 #1 screws

    Modifier

  6. Xbox Intec 7.2" Color Game Screen Disassembly: étape 5, image 1 de 2 Xbox Intec 7.2" Color Game Screen Disassembly: étape 5, image 2 de 2

    • Disconnect 2 headers

    • Lift wires over retaining posts

    Modifier

  7. Xbox Intec 7.2" Color Game Screen Disassembly: étape 6, image 1 de 2 Xbox Intec 7.2" Color Game Screen Disassembly: étape 6, image 2 de 2

    • Grab the edges of the board and lift up

    • Don't attempt to fully remove the board from the unit yet

    • Disconnect last header

    Modifier

  8. Xbox Intec 7.2" Color Game Screen Disassembly: étape 7, image 1 de 1

    • It's not necessary to remove the screen from the housing unless you need to.

    • Remove 4 #1 screws to remove screen

    Modifier

  9. Xbox Intec 7.2" Color Game Screen Disassembly: étape 8, image 1 de 2 Xbox Intec 7.2" Color Game Screen Disassembly: étape 8, image 2 de 2

    • Remove 4 #1 screws

    • Lift up on tab

    • Remove 3 #1 screws

    • Grab the edges and lift the board up

    • Don't attempt to fully remove the board from the unit yet

    Modifier

  10. Xbox Intec 7.2" Color Game Screen Disassembly: étape 9, image 1 de 1

    • Feed wires through the hinge enough to remove board from unit

    • These 4 headers are soldered directly to the board

    • If this board needs to be entirely removed, feed the wires all the way through the hinge.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 1 autre contributeur

Navy Vet 2015

Membre depuis le 06/25/15

7 296 Réputation

15 tutoriels rédigés

Badges: 28

+ 25 badges supplémentaires

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 35

Total : 192