Historique de l'étape n° 8 de How to Fix a Broken Wooden Frame

Modifications apportées à l'étape #8

Modifié par Kristen Gismondi — 14 mai 2019

Modification approuvée par Kristen Gismondi

	[* black] Once both of the loops have been tightly screwed in, get an approximation of how much wire you will be using.
	[* black] Put the wire through the loop with about 6" excess.
	[* black] Place the anchors for the wall a few inches above the screws and slightly centered.
-	[* black] Pull ~~taught~~ on the wire where the anchors are and put the opposite end of the wire through the loop.
+	[* black] Pull taut on the wire where the anchors are and put the opposite end of the wire through the loop.