Modifications apportées à l'étape #10
Modifié par Ian Thompson —
Modification approuvée par Arthur Shi
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [title] Depth Sensor |
|---|---|
| + | [title] Depth Sensor Installation |
| [* blue] Assemble the depth sensor by adding the o-rings, and the connective wires in the order pictured, leaving the nut ring to the side | |
| - | [* violet] Note that the connective wires connect the depth sensor to the sensor node board. |
| + | [* violet] Note that the connective wires connect the depth sensor to the sensor node board. Remember, red wire is responsible for power, black is for ground, and white is for data |
| [* red] Place the depth sensor through the larger hole, and secure it firmly by tightening the nut ring | |
| [* icon_note] Make sure the nut ring is tightened securely as it will keep the enclosure water-tight |