Aller au contenu principal

Modifications apportées à l'étape #6

Modifié par Kristen Gismondi

Modification approuvée par Kristen Gismondi

Avant
Après
Inchangé

Lignes de l'étape

[* black] Put the piece of fabric, facing the inside, on the ripped area. The pants should be inside out.
[* red] Use pin head needles to connect the fabric to the ripped area of the pants.
+[* black] Put thread in the eye of the hand sewing needle. Make sure that you leave a large tail, about 50 cm.
+[* black] Push the needle up through the underside of the fabric. Pull the needle up until there is some thread on the other side. Repeat until you stitch all the way around the pin head needles.