Modifications apportées à l'étape #1
Modifié par Kristen Gismondi —
Modification approuvée par Kristen Gismondi
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* red] Remove the four 2.9 mm screws that hold the cooling fan in order of 4, 3, 2, 1 using a Phillips #1 screwdriver. | |
| [* orange] Gently lift the plastic retaining flap to disconnect the ribbon cable. | |
| - | [* icon_note] The plastic that |
| + | [* icon_note] The plastic that holds the ribbon wire in place is a black lever on a tan block. |