Modifications apportées à l'étape #3
Modifié par Kristen Gismondi —
Modification approuvée par Kristen Gismondi
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* red] Unscrew the Wi-Fi panel screw with a #1 Phillips head screwdriver. Then pry the cover panel off with a flat edge tool. |
|---|---|
| + | [* red] Remove the Wi-Fi panel screw with a Phillips #1 screwdriver. |
| + | [* black] Pry the cover panel off with an opening tool. |
| [* orange] Disconnect the black and white wires. Then push the tabs outward (away from the Wi-Fi card) using your fingers. The card should then pop up. | |
| [* black] Pull the Wi-Fi card out from the device at a slight angle (horizontal with the casing). |