Réparez vos affaires Communauté Boutique

Modifications apportées à l'étape #11

Modifié par Kristen Gismondi —

Modification approuvée par Kristen Gismondi

Avant
Après
Inchangé

Lignes de l'étape

-[* red] Unscrew the two screws located above the power button logic board using a #1 Phillips head screwdriver.
-[* black] Move the logic board slowly out of its slot using a flat edge tool and your index finger.
-[* black] Pull the white ribbon upwards to disconnect the ribbon from the power button logic board.
+[* red] Remove the two screws located above the power button board using a Phillips #1 screwdriver.
+[* black] Move the board slowly out of its slot using an opening tool and your index finger.
+[* black] Pull the white ribbon upwards to disconnect the ribbon from the power button board.