Modifications apportées à l'étape #7
Modifié par Kristen Gismondi —
Modification approuvée par Kristen Gismondi
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* red] Remove the 3mm Phillips head screw that is between the circuit boards. |
|---|---|
| - | [* icon_reminder] The other screw was the 4mm screw that was between the circuit boards was taken off during step five of this guide. |
| - | [* orange] Remove the three 3.5mm Phillips head screws that are on the button circuit board. |
| + | [* red] Remove the 3 mm screw that is between the circuit boards using a Phillips #00 screwdriver. |
| + | [* orange] Remove the three 3.5 mm screws that are on the button circuit board using a Phillips #00 screwdriver. |