Modifications apportées à l'étape #10
Modifié par Kristen Gismondi —
Modification approuvée par Kristen Gismondi
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Use the plastic opening tool to |
|---|---|
| - | [* red] Carefully disconnect the ribbon cable that is attached to the user buttons circuit board from the ZIF connector that is attached to the motherboard with your thumb and index finger. |
| + | [* black] Use the plastic opening tool to separate the user button circuit board from the shutter button and settings dial housing unit. |
| + | [* red] Carefully disconnect the ribbon cable that is attached to the user buttons circuit board from the ZIF connector that is attached to the motherboard with your thumb and index finger. Get as close to the ZIF connector as possible without touching the motherboard. |
| [* icon_caution] Be careful not to the rip the ribbon cable out of the ZIF connector when removing. | |
| [* black] Remove the user button circuit board. | |
| - | [* icon_caution] When handling a circuit board, always hold it by the sides, the oils in your hands can be harmful to the board. |