Modifications apportées à l'étape #4
Modifié par Kristen Gismondi —
Modification approuvée par Kristen Gismondi
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Open device with spudger tool. |
|---|---|
| [* black] Use plastic opening tool to pry at the open slits on the side. | |
| [* icon_caution] One or two silver foam cubes may pop out of the device. These belong in the slots shown in the third picture. They do not need to go back until reassembly. | |
| [* icon_caution] Also the plastic connector door will fall off. It will need to be put back upon reassembly. |