Traduction de l’étape 10
Étape 10
-
We use a pair of tweezers to dig out the last bits behind the motherboard.
-
The missing piece: a small interconnect board for the power and volume buttons. We find the following chips:
-
IDT P9221 wireless power receiver
-
Lattice Semiconductor iCE40LM1K-CM36 iCE40 FPGA
-
Cirrus Logic CS35L35A audio amplifier
-
Texas Instruments LM3644 1.5 A camera flash LED driver
-
With the Mate's brains dissected, it's time to head towards the other end of the phone and check out its fancy footwork.
[* black] We use a [product|IF145-060-3|pair of tweezers|new_window=true] to dig out the last bits behind the motherboard. | |
[* black] The missing piece: a small interconnect board for the power and volume buttons. We find the following chips: | |
- | [* red] IDT |
- | [* orange] |
- | [* yellow] |
- | [* green] |
+ | [* red] IDT [link|https://www.idt.com/document/dst/p9221-r-datasheet|P9221|new_window=true] wireless power receiver |
+ | [* orange] Lattice Semiconductor [link|http://www.latticesemi.com/iCE40|iCE40LM1K-CM36|new_window=true] iCE40 FPGA |
+ | [* yellow] Cirrus Logic CS35L35A audio amplifier |
+ | [* green] Texas Instruments [link|https://www.ti.com/product/LM3644|LM3644|new_window=true] 1.5 A camera flash LED driver |
[* black] With the Mate's brains dissected, it's time to head towards the other end of the phone and check out its fancy footwork. |
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.