Aller au contenu principal

Remplacement de la vitre arrière du Samsung Galaxy S8+

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 5 tutoriels qui comprennent cette étape.

Anglais
Français

Traduction de l’étape 11

Étape 11
Samsung Galaxy S8+ Back Glass Replacement: étape 0, image 1 de 1
  • Remove the back cover.

  • To install a new back cover:

  • Use tweezers to peel away any remaining adhesive from the phone's chassis. Then clean the adhesion areas with high concentration isopropyl alcohol (at least 90%) and a lint-free cloth to prep the surface for the new adhesive.

  • Peel the adhesive backing off of the new rear glass, carefully line up one edge of the glass against the phone chassis, and firmly press the glass onto the phone.

  • To reinstall the back cover, or to install a back cover without pre-installed adhesive, follow this guide.

  • Be sure to turn on your phone and test your repair before installing new adhesive and resealing the phone.

  • If desired, you may reinstall the back cover without replacing the adhesive. Remove any large chunks of adhesive that might prevent the back cover from sitting down flush. After installation, heat the back cover and apply pressure to secure it. It won't be waterproof, but the glue is usually more than strong enough to hold.

  • You may also need to transfer the camera bezel to your new part. If that's the case, follow our camera bezel replacement guide.

Ôtez la coque arrière.

Pour monter une nouvelle coque arrière :

Prenez une pincette pour décoller tous les restes d'adhésif du châssis du téléphone. Puis nettoyez les zones d'adhérence avec de l'alcool isopropylique à haute concentration (au moins 90 %) et un chiffon non pelucheux. Essuyez dans une seule direction, sans faire de va-et-vient. Le nouvel adhésif adhère mieux sur une surface préparée de la sorte.

Pour remonter la coque arrière, ou monter une coque arrière sans adhésif préinstallé, consultez ce tutoriel.

Veillez à allumer votre téléphone et à tester votre réparation avant de poser le nouvel adhésif et de refermer le téléphone.

Si vous préférez, remontez la coque arrière sans remplacer l'adhésif. Retirez les gros morceaux d'adhésif qui pourraient empêcher la coque arrière de bien s'enclencher. Après le remontage, faites chauffer la coque arrière et appuyez dessus pour qu'elle adhère. Le téléphone ne sera plus étanche, mais la colle suffit largement à le faire tenir.

Vous devrez peut-être transférer le joint de la caméra. Si c'est le cas, consultez notre ttutoriel de remplacement.

[* black] Remove the back cover.
[* icon_reminder] To install a new back cover:
- [* black] Use tweezers to peel away any remaining adhesive from the phone's chassis. Then clean the adhesion areas with high concentration isopropyl alcohol (at least 90%) and a lint-free cloth to prep the surface for the new adhesive.
+ [* black] Use [product|IF145-020|tweezers] to peel away any remaining adhesive from the phone's chassis. Then clean the adhesion areas with high concentration isopropyl alcohol (at least 90%) and a lint-free cloth to prep the surface for the new adhesive.
[* black] Peel the adhesive backing off of the new rear glass, carefully line up one edge of the glass against the phone chassis, and firmly press the glass onto the phone.
[* icon_reminder] To reinstall the back cover, or to install a back cover without pre-installed adhesive, [guide|124003|follow this guide|new_window=true].
[* icon_note] Be sure to turn on your phone and test your repair before installing new adhesive and resealing the phone.
[* icon_note] If desired, you may reinstall the back cover without replacing the adhesive. Remove any large chunks of adhesive that might prevent the back cover from sitting down flush. After installation, heat the back cover and apply pressure to secure it. It won't be waterproof, but the glue is usually more than strong enough to hold.
[* icon_reminder] You may also need to transfer the camera bezel to your new part. If that's the case, follow our [guide|123030|camera bezel replacement guide|stepid=237617|new_window=true].

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.