Aller au contenu principal

Remplacement de l'écran de l'iPhone 13 Pro

Anglais
Français

Traduction de l’étape 2

Étape 2
iPhone 13 Pro Screen Replacement, Anti-Clamp instructions: étape 0, image 1 de 3 iPhone 13 Pro Screen Replacement, Anti-Clamp instructions: étape 0, image 2 de 3 iPhone 13 Pro Screen Replacement, Anti-Clamp instructions: étape 0, image 3 de 3
Anti-Clamp instructions
  • The next three steps demonstrate the Anti-Clamp, a tool we designed to make the opening procedure easier. If you aren't using the Anti-Clamp, skip down three steps for an alternate method.

  • For complete instructions on how to use the Anti-Clamp, check out this guide.

  • Pull the blue handle backwards to unlock the Anti-Clamp's arms.

  • Slide the arms over the left edge of your iPhone.

  • Position the suction cups near the bottom edge of the iPhone—one on the front, and one on the back.

  • Squeeze the cups together to apply suction to the desired area.

  • If you find that the surface of your iPhone is too slippery for the Anti-Clamp to hold onto, you can use the included tape pad to create a grippier surface.

Les trois étapes suivantes montrent comment utiliser l'Anti-Clamp, un outil conçu pour faciliter la procédure d'ouverture. Si vous n'utilisez pas l'Anti-Clamp, sautez ces trois étapes pour une autre méthode.

Pour des instructions complètes sur l'utilisation de l'Anti-Clamp, suivez ce tutoriel.

Tirez la poignée bleue vers l'arrière pour débloquer les bras de l'Anti-Clamp.

Insérez le côté gauche de votre iPhone entre les bras.

Positionnez les ventouses en bas de l'écran : une devant, une derrière.

Appuyez sur les ventouses pour écarter à l'endroit désiré.

Si vous trouvez que la surface de votre appareil est trop glissante pour que l'Anti-Clamp y adhère, vous pouvez appliquer le ruban adhésif inclus pour obtenir une surface plus agrippante.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.