Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 2 tutoriels qui comprennent cette étape.
Traduction de l’étape 1
Étape 1
Unfasten the Taptic Engine connector cover
-
Use your Phillips #000 driver to remove the four screws securing the Taptic Engine and its connector cover:
-
One 1.4 mm‑long screw
-
One 1.9 mm‑long screw (larger screw head)
-
One 1.9 mm‑long screw (smaller screw head)
-
One 2.1 mm‑long screw
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.