Traduction de l’étape 1
Étape 1
-
There are 2 x philips screws, securing the HDD Caddy Case. Remove them and slide the HDD to disconnect it from the SATA Connector.
-
The Caddy Case is held to the HDD by 4x Phillips screws. Remove them and separate the HDD from the case.
-
After installing the new HDD you must install a new OS or clone your old HDD.
-
You can install SATA HDD, 2.5" up to 1TB.
-
Did you do it successfully?
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.