Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 2 tutoriels qui comprennent cette étape.
Traduction de l’étape 4
Étape 4
-
Using the plastic opening tool, detach the wires connected to the metal plate
-
Use the plastic opening tool to remove wires connected to the circuit board on the far right.
-
Use the tweezers to remove wires connected to the circuit board in between the two black wires.
-
Use the tweezers to press the release tab on the front and back of the plastic white wire head.
-
Once the tab is pressed on both sides, lift up to slide wire head out of socket.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.