Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 7 tutoriels qui comprennent cette étape.
Traduction de l’étape 1
Étape 1
-
Remove the following 12 screws securing the front bezel to the rear case:
-
Eight 13 mm T8 Torx screws
-
Four 25 mm T8 Torx screws
-
Six 13 mm T8 Torx screws
-
Four 25 mm T8 Torx screws
-
Two 35 mm T8 Torx screws
[* black] Remove the following 12 screws securing the front bezel to the rear case: | |
[* red] Eight 13 mm T8 Torx screws | |
- | [* icon_note] Alternatively, you might have six 13 mm and two 25 mm T8 Torx screws |
[* orange] Four 25 mm T8 Torx screws | |
- | [* icon_note] Alternatively, you might have two 25 mm (outer) and two 35 mm (inner) T8 Torx screws |
+ | [* icon_note] You may have different-length screws depending on your model: |
+ | [* yellow] Six 13 mm T8 Torx screws |
+ | [* green] Four 25 mm T8 Torx screws |
+ | [* light_blue] Two 35 mm T8 Torx screws |
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.