Aller au contenu principal

Reemplazo de la pantalla del Samsung Galaxy S6 Edge

Anglais
Espagnol

Traduction de l’étape 3

Étape 3
Samsung Galaxy S6 Edge Screen Replacement: étape 0, image 1 de 2 Samsung Galaxy S6 Edge Screen Replacement: étape 0, image 2 de 2
  • Insert an opening pick into the heated edge of the phone, between the plastic frame and the display.

  • The pick should slide underneath the plastic and remain above the copper colored shielding.

  • If you can see the pick through front glass, the pick is riding on top of the display panel. Pull the pick out, angle it so that the point aims more towards the plastic frame side, and try again.

  • Keep in mind that the display cable threads through the midframe just above the midpoint of the right edge. It may interfere with your cutting if the pick is too deep.

Inserte una púa de apertura en el borde caliente del teléfono, entre el marco de plástico y la pantalla.

La púa debe deslizarse por debajo del plástico y permanecer sobre el blindaje de color cobre.

Si puedes ver la púa a través del cristal frontal, la púa está encima del panel de la pantalla. Saca la púa, inclínala para que la punta apunte más hacia el lado del marco de plástico, e inténtalo de nuevo.

Ten en cuenta que el cable de la pantalla pasa a través del marco justo por encima del punto medio del borde derecho. Puede interferir con el corte si la púa es demasiado profunda.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.