Aller au contenu principal

Smontaggio MacBook Pro Touch Bar 13" 2018

Anglais
Italien

Traduction de l’étape 12

Étape 12
MacBook Pro 13" Touch Bar 2018 Teardown: étape 0, image 1 de 3 MacBook Pro 13" Touch Bar 2018 Teardown: étape 0, image 2 de 3 MacBook Pro 13" Touch Bar 2018 Teardown: étape 0, image 3 de 3
  • And for our dessert course we have: a brand new USB-C power adapter!

  • The A/C adapter included with this 13" MacBook Pro does indeed sport the new model number A1947 (vs. A1718, bottom), so it's time to bust out the ultrasonic cutter and go to town.

  • After clawing painfully through more layers and rubberized filler than we've ever seen in one of these things, we finally free the internals.

  • Opening the previous adapter (on the left) was a walk in the park compared to this unit, but it does look like this model benefits from redesigned internals, some additional shielding, and lots of impact-resistant foam rubber.

  • That said, Apple has also swapped the aluminum USB-C port for a plastic one ...

E, servito come dessert, ecco nientemeno che un nuovo caricabatterie USB-C!

L'alimentatore a corrente alternata incluso con questo MacBook Pro da 13" in effetti ha il nuovo numero modello A1947 (invece di A1718, dispositivo in basso), quindi è ora di attivare il cutter a ultrasuoni per saperne di più.

Dopo aver scavato faticosamente attraverso strati e riempitivi gommati quali non abbiamo mai visto dentro uno di questi cosi, riusciamo ad arrivare alle parti interne.

Rispetto a quanto richiesto da questa unità, l'apertura dell'alimentatore precedente (a sinistra) era stato una passeggiata, ma sembra che questo modello abbia beneficiato di parti interne ridisegnate, di una schermatura supplementare e di tanta schiuma gommata per una migliore resistenza agli urti.

Detto ciò, Apple ha anche sostituito la porta USB-C in alluminio con una in plastica...

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.