Réparez vos affaires Communauté Boutique

任天堂Switch的屏蔽板的更换

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 20 tutoriels qui comprennent cette étape.

Retourner au tutoriel
Anglais
Chinois
Étape précédente

Traduction de l’étape 3

Étape 3
Nintendo Switch Shield Plate Replacement: étape 0, image 1 de 3 Nintendo Switch Shield Plate Replacement: étape 0, image 2 de 3 Nintendo Switch Shield Plate Replacement: étape 0, image 3 de 3

  • Insert a spudger underneath the shield plate along the edge of the device.

  • Pry up to lift the shield plate and remove it from the device.

  • You may feel a bit of resistance. This is normal, since the shield plate is slightly bonded to the heat sink with thermal paste.

  • A thick pink thermal compound bridges the gap between the shield plate and the copper heat sink underneath. This helps prevent the Switch from overheating.

  • You can reuse the pink thermal compound if you're careful. Keep the compound clean and make sure it makes solid contact between the heat sink and the shield during reassembly.

  • If you need to replace it, refer to our thermal paste guide to remove the old thermal compound and replace it with an appropriate compound, such as K5 Pro, during reassembly.

沿设备边缘在屏蔽板下方插入撬棒。

向上撬起屏蔽板。

您可能会感到有点阻力。 这是正常现象，因为屏蔽板和散热器之间有导热膏——稍微有点黏性。

在铜质热管和屏蔽罩之间涂有一层粉红色导热硅脂，这有助于防止 Switch 过热。

如果你足够小心的话，你可以重复使用这些粉红色导热硅脂。只要硅脂保持干净，并确保在重新组装时它与散热器和屏蔽罩紧密接触。

如果您需要更换它，请参考我们的散热硅脂更换指南来移除旧的散热硅脂并为其在重新组装时更换合适的硅脂，例如K5 Pro。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.