Nintendo Switch Vervanging van de hoofdtelefoonjack en gamekaartlezer

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 10 tutoriels qui comprennent cette étape.

Anglais

Néerlandais

Traduction de l’étape 3

Étape 3

Use the point of a spudger to pry the headphone jack and game card reader connector straight up to disconnect it from the motherboard.
To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend and cause permanent damage.
If the touch screen doesn't work and/or game cards aren't detected after reassembly, you might have not fully reconnected this press connector. Carefully disconnect it and try again.

	[* black] Use the point of a spudger to pry the headphone jack and game card reader connector straight up to disconnect it from the motherboard.
+	[* icon_reminder] To re-attach [guide\|25629\|press connectors\|stepid=70308\|new_window=true] like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend and cause permanent damage.
+	[* icon_note] If the touch screen doesn't work and/or game cards aren't detected after reassembly, you might have not fully reconnected this press connector. Carefully disconnect it and try again.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.