Réparez vos affaires Communauté Boutique

iPhone XS 耳机扬声器和前传感器组件更换

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront le tutoriel qui comprend ces étapes.

Retourner au tutoriel
Anglais
Chinois
Étape précédente Étape suivante

Traduction de l’étape 8

Étape 8
iPhone XS Earpiece Speaker and Front Sensor Assembly Replacement: étape 0, image 1 de 3 iPhone XS Earpiece Speaker and Front Sensor Assembly Replacement: étape 0, image 2 de 3 iPhone XS Earpiece Speaker and Front Sensor Assembly Replacement: étape 0, image 3 de 3

  • If you successfully removed the entire ambient light sensor, as shown in the first photo, continue to the next step below.

  • If the white diffuser strip detached and remains embedded in the display, as shown in the second photo, you will need to carefully lever it out along the top edge using a thin blade or pry tool. Re-applying heat first may make this task a bit easier.

  • During reassembly, install the diffuser into the display first, making sure it faces the right direction (the front-facing side is shown in the first image, and the rear-facing side is shown in the third).

  • Then, set the ambient light sensor on top of the diffuser. You will need to hold the sensor in position while installing the screws securing the earpiece/sensor assembly. Once the screws are tightened, the sensor will stay in place and work normally.

如果你成功移除了整个环境光线传感器，如第一张照片所示，请继续执行下一步骤。

如果白色漫射条脱落并嵌入显示屏中，如第二张照片所示，则需要使用薄刀片或撬具工具沿顶部边缘小心地将其拉出。首先重新加热可以使这项任务更容易一些。

在重组过程中，首先将漫射器安装到显示器中，确保它朝向正确的方向（前面一侧显示在第一张图片中，后面一面显示在第三张图片中）。

然后，将环境光传感器设置在漫射器顶部。在安装固定耳机/传感器组件的螺丝时，你需要将传感器固定到位。拧紧螺丝后，传感器将保持原位并正常工作。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.