Réparez vos affaires Communauté Boutique

Vue éclatée de la Nintendo Wii U

Retourner au tutoriel
Anglais
Français
Étape précédente Étape suivante

Traduction de l’étape 5

Étape 5
Nintendo Wii U Teardown: étape 0, image 1 de 2 Nintendo Wii U Teardown: étape 0, image 2 de 2

  • The device is pretty simple so far, but has no shortage of screws. There's no adhesive holding the U together, but were it not for our Magnetic Project Mat, all of these screws could get out of hand. So far we have encountered both Phillips and Tri-point screws, nothing our 64 Bit Driver Kit can't handle.

  • After some unscrewing, the front panel pops right off.

L'appareil est assez simple jusqu'à présent, mais ne manque pas de vis. Pas d'adhésif pour fermer la Wii U, mais sans notre tapis de projet magnétique, toutes ces vis pourraient devenir incontrôlables. Jusqu'à présent, nous avons rencontré à la fois des vis cruciformes et Tri-wing, rien que notre 64 Bit Driver Kit ne puisse gérer.

Après quelques coups de tournevis, le panneau avant se détache sans broncher.

-[* black] The device is pretty simple so far, but has no shortage of screws. There's no adhesive holding the U together, but were it not for our [product|IF145-167|Magnetic Project Mat], all of these screws could get out of hand. So far we have encountered both Phillips and Tri-wing screws, nothing our [http://bit.ly/sV8KKG|64 Bit Driver Kit] can't handle.
+[* black] The device is pretty simple so far, but has no shortage of screws. There's no adhesive holding the U together, but were it not for our [product|IF145-167|Magnetic Project Mat], all of these screws could get out of hand. So far we have encountered both Phillips and Tri-point screws, nothing our [http://bit.ly/sV8KKG|64 Bit Driver Kit] can't handle.
[* black] After some unscrewing, the front panel pops right off.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.