Aller au contenu principal

iPad Mini CDMA Front Panel Austausch

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 42 tutoriels qui comprennent cette étape.

Anglais
Allemand

Traduction de l’étape 20

Étape 20
iPad Mini CDMA Front Panel Replacement: étape 0, image 1 de 3 iPad Mini CDMA Front Panel Replacement: étape 0, image 2 de 3 iPad Mini CDMA Front Panel Replacement: étape 0, image 3 de 3
  • Slide the lower left pick to the lower left corner to cut the adhesive on that corner.

  • Leave the pick at the corner. Do not pry any farther, and do not remove the pick from the iPad.

  • There are quite a few things to avoid beneath the lower bezel, so study the third image closely:

  • Antennas

  • Home button cavity

  • Digitizer cable

  • The following steps will direct you where to pry to avoid damage to these components. Only apply heat and pry where directed.

Schieb das linke untere Plektrum um die untere linke Ecke und schneide so den Kleber auf.

Lasse das Plektrum auf der Ecke stehen. Trenne nicht weiter auf und entferne nicht das Plektrum.

Du musst unter der unteren Blende einige Dinge vermeiden. Sieh dir also das dritte Bild genau an:

Die Vertiefung für den Home Button

Das Kabel des Digitizers

Die folgenden Schritte zeigen dir, wie und wo du arbeiten musst, um Schäden an den genannten Bauteilen zu vermeiden. Erwärme nur und hebele nur dort, wo angegeben.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.