Aller au contenu principal

MacBook Pro 15" Touch Bar Late 2016 로직 보드 어셈블리 교체

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 2 tutoriels qui comprennent cette étape.

Anglais
Coréen

Traduction de l’étape 24

Étape 24
MacBook Pro 15" Touch Bar Late 2016 Logic Board Assembly Replacement: étape 0, image 1 de 3 MacBook Pro 15" Touch Bar Late 2016 Logic Board Assembly Replacement: étape 0, image 2 de 3 MacBook Pro 15" Touch Bar Late 2016 Logic Board Assembly Replacement: étape 0, image 3 de 3
  • Disconnect all three antenna cables by prying each one straight up from its socket.

  • Slide your tweezers or the flat end of your spudger underneath each cable until it's near the socket, and then gently twist or pry up to disconnect it.

  • To reconnect each cable, align the connector directly over its socket, and then press down so it snaps into place.

안테나 케이블 3개를 모두 소켓에서 똑바로 들어올려 연결 해제하세요.

핀셋이나 스퍼저의 납작한 끝을 각 케이블 밑으로 밀어 소켓에 가까이 오도록 한 다음 살살 비틀거나 들어 올려 연결 해제하세요.

각 케이블을 다시 연결하려면 커넥터를 소켓 바로 위에 정렬한 다음 아래로 눌러 제자리에 고정하세요.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.