Réparez vos affaires Communauté Boutique

MacBook Pro 15" Touch Bar Late 2016 로직 보드 어셈블리 교체

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 2 tutoriels qui comprennent cette étape.

Retourner au tutoriel
Anglais
Coréen
Étape précédente Étape suivante

Traduction de l’étape 25

Étape 25
MacBook Pro 15" Touch Bar Late 2016 Logic Board Assembly Replacement: étape 0, image 1 de 2 MacBook Pro 15" Touch Bar Late 2016 Logic Board Assembly Replacement: étape 0, image 2 de 2

  • Remove the ten screws securing the logic board assembly:

  • Two 2.8 mm T3 Torx screws

  • Five 2.9 mm T5 Torx screws

  • One 3.7 mm T5 Torx screw

  • One 3.9 mm T8 Torx screw

  • One 3.8 mm T8 Torx screw

  • During reassembly, install these screws only loosely. Adjust the board position if necessary until all the connectors line up, and then tighten the screws.

로직 보드 어셈블리를 고정하는 나사 10개를 풀어주세요:

2.8mm T3 Torx 나사 2개

2.9mm T5 Torx 나사 5개

3.7mm T5 Torx 나사 1개

3.9mm T8 Torx 나사 1개

3.8mm T8 Torx 나사 1개

재조립할 때 이 나사들을 헐겁게 조이세요. 필요한 경우 모든 커넥터가 정렬될 때까지 보드 위치를 조절한 다음 나사를 조이세요.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.