Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront le tutoriel qui comprend ces étapes.
Traduction de l’étape 26
Étape 26
Preparing Node Handle pt. 3
-
attach the winged strut channel bracket to the 8" telespar using the remaining two hex bolts and hex nuts
-
when tightening the hex nuts, ensure the edge of the nut points directly outwards (as shown), or else the struct channel piece will not slide inside
-
confirm the T-shaped strut channel piece slides into the telespar, and the handle is now finished
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.