Aller au contenu principal

Reemplazo de la placa de escudo de LCD de iPad Mini 3 Wi-Fi LCD

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 16 tutoriels qui comprennent cette étape.

Anglais
Espagnol

Traduction de l’étape 8

Étape 8
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: étape 0, image 1 de 3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: étape 0, image 2 de 3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: étape 0, image 3 de 3
  • Take the first pick you inserted and slide it up toward the top corner of the iPad.

  • If you can see the tip of the opening pick through the front glass, don't panic—just pull the pick out a little bit. Most likely, everything will be fine, but try to avoid this as it may deposit adhesive on the front of the LCD that is difficult to clean off.

Toma la primera púa que has insertado y deslízala hacia la esquina superior del iPad.

Si ves la punta de la púa de apertura a través del cristal frontal, no te asustes: tira un poco de la púa hacia fuera. Lo más probable es que todo vaya bien, pero intenta evitarlo, ya que puede depositar adhesivo en la parte frontal de la pantalla LCD difícil de limpiar.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.