Aller au contenu principal

Reemplazo de la placa de escudo de LCD de iPad Mini 3 Wi-Fi LCD

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 16 tutoriels qui comprennent cette étape.

Anglais
Espagnol

Traduction de l’étape 9

Étape 9
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: étape 0, image 1 de 1
  • Reheat the iOpener and place it on the top edge of the iPad, over the front-facing camera.

  • Be careful not to overheat the iOpener during the repair procedure. Wait at least ten minutes before reheating the iOpener.

  • If you have a flexible iOpener, you can bend it to heat both the upper left corner and the upper edge at the same time.

Vuelve a calentar el iOpener y colócalo en el borde superior del iPad, sobre la cámara frontal.

Ten cuidado de no sobrecalentar el iOpener durante el procedimiento de reparación. Espera al menos diez minutos antes de volver a calentar el iOpener.

Si tienes un iOpener flexible, puedes doblarlo para calentar la esquina superior izquierda y el borde superior al mismo tiempo.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.