Aller au contenu principal

iPad Mini 3 Wi-Fi LCD-Abschirmung tauschen

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 16 tutoriels qui comprennent cette étape.

Anglais
Allemand

Traduction de l’étape 21

Étape 21
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: étape 0, image 1 de 3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: étape 0, image 2 de 3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: étape 0, image 3 de 3
  • Leave the pick from the last step in place to prevent the adhesive from re-sealing.

  • With a new pick, slice gently over the left-hand antenna, stopping before the home button.

  • Only slide the pick from the outer edge toward the center of the iPad. Do not move the pick back toward the outer edge, as moving in this direction may damage the antenna.

  • If you need to slide the pick over the lower section more than once, remove it and re-insert at the outer edge, and slide inwards.

  • Leave the pick in place before moving on.

Belasse das Plektrum des vorherigen Schrittes dort wo es ist, um das erneute Verkleben der Teile zu verhindern.

Schneide mit einem neuen Plektrum vorsichtig über die linksseitige Antenne und stoppe vor dem Home Button.

Schiebe das Plektrum nur von der äußeren Ecke in Richtung Mitte des iPad. Ziehe es nicht zurück in Richtung des äußeren Rands, da du ansonsten die Antenne beschädigen könntest.

Falls du das Plektrum mehrmals durch den unteren Bereich schieben musst, dann ziehe es heraus, führe es erneut an der äußeren Ecke ein und schiebe es nach innen.

Belasse das Plektrum dort, bevor du weitermachst.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.