Aller au contenu principal

iPad Mini 3 Wi-Fi LCD-Abschirmung tauschen

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 16 tutoriels qui comprennent cette étape.

Anglais
Allemand

Traduction de l’étape 22

Étape 22
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: étape 0, image 1 de 3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: étape 0, image 2 de 3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: étape 0, image 3 de 3
  • Insert the tip of one last pick next to the previous step's pick, and slide it beneath the home button.

  • Stop about an inch from the right-hand side to avoid cutting the digitizer cable.

  • Insert the pick slightly deeper and work it back toward the home button.

  • Again, be sure to only slide the pick toward the center of the iPad when it is fully inserted; otherwise you may damage the antenna beneath the glass.

Schiebe die Spitze eines letzen Plektrums neben das Plektrum, dass du zuvor eingeführt hast und schiebe es unter den Home Button.

Stoppe etwa 2,5 cm vor der rechten Seite, um eine Beschädigung des Touchscreen-Kabels zu vermeiden.

Führe das Plektrum nun vorsichtig etwas weiter hinein und arbeite dich zurück in Richtung Home Button.

Achte darauf, das Plektrum nur dann in Richtung Mitte des iPads zu schieben, wenn es vollkommen eingesetzt ist, sonst beschädigst du möglicherweise die Antenne unter dem Glas.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.