Aller au contenu principal

iPad Mini 3 Wi-Fi LCDシールドプレートの交換

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 16 tutoriels qui comprennent cette étape.

Anglais
Japonais

Traduction de l’étape 21

Étape 21
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: étape 0, image 1 de 3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: étape 0, image 2 de 3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: étape 0, image 3 de 3
  • Leave the pick from the last step in place to prevent the adhesive from re-sealing.

  • With a new pick, slice gently over the left-hand antenna, stopping before the home button.

  • Only slide the pick from the outer edge toward the center of the iPad. Do not move the pick back toward the outer edge, as moving in this direction may damage the antenna.

  • If you need to slide the pick over the lower section more than once, remove it and re-insert at the outer edge, and slide inwards.

  • Leave the pick in place before moving on.

接着剤の再接着を防ぐために、前に残した開口ピックはそのままの位置に残してしておきます。

新しい開口ピックを使って、左側のアンテナ上をゆっくりと切開し、ホームボタンの手前で止めます。

ピックは外周からiPadの中心に向かって滑らせてください。外周に向かってピックを戻すと、アンテナが破損する恐れがあります。

もし、ピックを下の部分に何度もスライドさせる必要がある場合は、ピックを外して外周部に再度挿入し、内側にスライドさせてください。

ピックはそのままにして次に進みます。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.