Aller au contenu principal

iPad Mini 3 Wi-Fi LCDシールドプレートの交換

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 16 tutoriels qui comprennent cette étape.

Anglais
Japonais

Traduction de l’étape 22

Étape 22
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: étape 0, image 1 de 3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: étape 0, image 2 de 3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: étape 0, image 3 de 3
  • Insert the tip of one last pick next to the previous step's pick, and slide it beneath the home button.

  • Stop about an inch from the right-hand side to avoid cutting the digitizer cable.

  • Insert the pick slightly deeper and work it back toward the home button.

  • Again, be sure to only slide the pick toward the center of the iPad when it is fully inserted; otherwise you may damage the antenna beneath the glass.

最後に差し込んだ開口ピックの先端を、前の手順で残したピックの隣に挿入し、ホームボタンの下までスライドさせます。

デジタイザーケーブルを切断しないように、右側から約2cm手前で止めます。

ピックを少し深めに挿入し、ホームボタンに向かってスライドしていきます。

この場合も、ピックが完全に挿入された状態でiPad中央に向かってスライドしてください。ガラスの下にあるアンテナが破損する恐れがあるためです。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.